Marvel MLBV024-SG01B, Краткое руководство пользователя

Страница: 7 / 18

7
2
1
Grille Installation
REMOVING AND INSTALLING GRILLE
Removing the grille
1. Disconnect power to the unit.
2. Loosen the two screws (1).
3. Remove grille (2) from unit.
Installing the grille
1. Align cabinet and grille holes and secure, but do not
over tighten grille screws (1).
2. Reconnect power to the unit.
!
WARNING
WARNING -
Disconnect electric power to the unit
before removing the grille. When using the unit, the
grille must be installed.
!
WARNING
WARNING -
DO NOT touch the condenser fins.
The condenser fins are SHARP and can be easily
damaged.
Figure 11
Door Swing
Units have a zero clearance for the door to open 90 o , when
installed adjacent to cabinets.
Stainless steel models require 2-1/8” (54 mm) door
clearance to accommodate the handle if installed next to a
wall.
Door Adjustments
Door Alignment and Adjustment
Align and adjust the door if it is not level or is not sealing
properly. If the door is not sealed, the unit may not cool
properly, or excessive frost may form in the interior.
Properly aligned, the door’s gasket should be firmly in
contact with the cabinet all the way around the door (no
gaps). Carefully examine the door’s gasket to ensure that
it is firmly in contact with the cabinet. Also make sure the
door gasket is not pinched on the hinge side of the door.
To align and adjust the door:
Remove grille:
Remove the grille (see GRILLE INSTALLATION section of
this guide).
1. Loosen (do not remove) top and bottom hinge screws.
2. Align door squarely with cabinet.
3.
Make sure gasket is firmly in contact with cabinet all
the way around the door (no gaps)
4. Tighten bottom hinge screws.
5. Tighten top hinge screws.
Figure 12
1/4" Min.
Wall
21"
Wall
21"
16-1/2" 16-1/2"
2" Min.
90°
Door Swing
90°
Door Swing
Black and White Models
2115R Models
Stainless Models
Wall Wall
21"
16-1/2"
2" Min.
90°
Door Swing
Stainless Steel
21"
16-1/2"
90°
Door Swing
Black, White and Wood Overlay
1/4" Min.
2115WC Models
Wall Wall
90°
Door Swing
Integrated Stainless Steel, Black and White
90°
Door Swing
2175R(F) & 2275WC Models
90°
Door Swing
Wall Wall
21"
25-1/2"
90°
Door Swing
21"
25-1/2"
Stainless Steel Wood Overlay
2175BEV
90
°
Door Swing
Wall Wall
90°
Door Swing
Stainless Steel
2175WC Models
2-1/8" Min.
(54 mm)
1/4" Min.
(6 mm)
2-1/8" Min.
(54 mm)
1/4" Min.
(6 mm)
2-1/8" Min.
(54 mm)
1/4" Min.
(6 mm)
Black, White and Integrated
DOOR ADJUSTMENTS