Door Adjust
CHECKING DOOR ALIGNMENT
The unit’s door is aligned at the factory before shipment.
However, its alignment could have been disturbed during
shipment.
NOTICE
Properly aligned, the door’s gasket should be firmly
in contact with the cabinet all the way around the
door (no gaps).
1. Carefully examine the door’s gasket to ensure that it is firmly
in contact with the cabinet.
2. When inspecting door alignment, make sure the door
gasket is not pinched on the hinge side of the door.
ALIGNMENT AND ADJUSTMENT
1. Loosen (do not remove) top and bottom hinge screws.
2. Align door squarely with cabinet. Make sure gasket is
firmly in contact with cabinet all the way around the door
(no gaps).
3. Tighten bottom hinge screws.
4. Tighten top hinge screws.
REVERSING THE DOOR
Location of the unit may make it desirable to mount the door
on the opposite side of the cabinet.
The hinge hardware will be removed and reinstalled on the
opposite side of the cabinet.
To reverse the door mounting, perform the following:
1. Remove grille (see GRILLE INSTALLATION).
2. Remove top hinge from cabinet (three screws). Hold
door to keep it from falling.
3. Lift and tilt door toward you to remove.
4. Remove pivot screw from hinge, flip hinge over, and
install the pivot screw in the same hole but from the
opposite surface.
Bottom
Hinge
Reversible
Top Hinge
Pivot Screw
Right Side
Door Swing
Right Side
Hinge
Left Side
Hinge
Left Side
Door Swing
Top Hinge
Right Side
Top Hinge
Left Side
Pivot
Screw
10
Installation Operation and Maintenance Instructions
