Marvel 8SBAR Скачать руководство пользователя страница 6

Adjustable Temperature Control

Please see “How to Operate Your Refrigerated
Beverage Center” on page two.

Interior Light and Switch

The interior light makes it easy to view the
contents of your beverage center. When the
switch is in the “OFF” position, the light will come
on when the door is opened. When the switch is
pushed such that the “red” portion of the rocker is
showing, the switch is in the “on” position and the
interior light will stay on continuously. Remember
to turn the off the light when it is no longer
needed.

Roll-out Shelves

The roll-out shelves may be pulled out
approximately 14 inches to facilitate product
loading and retrieval. Do not lean on or press
down heavily on the shelves, doing so may
damage the shelves or their content. Pull out
shelves gently to minimize any possible item
shifting. To maintain stability, avoid pulling out
more than one shelf at any time.

The roll-out shelves are equipped with a
removable center section that allows you to
customize the storage capability of your beverage
center. Your unit is shipped with two glass
shelves,one wine rack, one wooden bottle cradle,
and one fixed wire shelf. For added versatility,
additional center sections are available. Please
contact dealer or see Marvel’s website at
www.marvelindustries.com for ordering.

Single Bottle Racks

Because bottles are not stacked on top of each
other, you can easily view and access your
inventory without disturbing other bottles.

FEATURES

All specifications and product design subject to change without notice. 

Such revisions do not entitle the buyer to corresponding changes, improvements, 

additions, replacements or compensation for previously purchased products

.

6

Содержание 8SBAR













Отзывы: