Marvel 3SBARE, Инструкции по установке, эксплуатации и обслуживанию, Страница: 17 / 24

16
FEATURES FOR BEVERAGE REFRIGERATORS
Insert Wine Bottles
The wine rack roll-out shelf holds four (4) bottles to ten (10)
bottles of wine depending on model. See Figure 13 to 15
for typical wine bottle orientation.
Loading Tips and Suggestions
Your beverage center comes with sliding glass shelves and
(1) wine shelf. The wine shelf should be located in the low-
est position in the cabinet followed by a glass shelf directly
above. This glass shelf will help keep your wine shelf be-
tween 5
°
& 7
°
F warmer than the rest of the cabinet, which
is ideal for wine storage.
Keep wines that you plan to use for everyday drinking and
entertaining on the front half of the shelf where labels are
completely visible. Place wines for aging or longer term
storing in the rear.
Wine Shelf
Since bottles are not stacked on top of each other, you can
easily view and access your inventory without disturbing
other bottles.
Roll-out Shelves
The roll-out shelves may be pulled out approximately 14
inches to facilitate adding or removing beverages. Do
NOT lean on or press down heavily on the shelves. Doing
so may damage the shelves and/or the contents stored on
them. Pull the shelves out gently and carefully to minimize
any possible item shifting. AVOID pulling out more than
one (1) shelf at any time to maintain stability.
Figure 13
3SBARE
Figure 14
6SBARE
Figure 15
8SBARE