Maruyama MD300, Руководство пользователя

Страница: 8 / 16

— 3 —
Throttle Lever
The lowest step is the stop position.
The throttle-lever adjusts the engine speed.
High speed is obtained by moving the lever up.
Shutter Lever
The shutter lever adjusts the machine discharge quantity.
The discharge quantity can be increased or decreased by moving the lever to your side while
carrying the machine to your back.
Shutter Arm
Select Much, Middle, or Few when adjusting the discharge quantity in response to the type of
material being sprayed and the spraying method.
Close
Throttle lever
Shutter lever
Powder chemical
▲
多
Fertilizer
▲
中
Granule chemical
▲
少
Connecting rod
Link arm
Lock nut
Lock Lever
You can attach or detach the chemical tank to a fan-case body with one-touch.
This is done by removing the intermediate rod and turning the crescent. The tank can be
removed with the chemical in it so that the chemical can be recovered.
Electric Charge Prevention Equipment
◦ Static electricity builds up in the chemical spray depending on the type of chemical,
temperature, and humidity, and this could generate a strong static electric charge. To
prevent this, use the electricity rejection tape and ground braided line attached to the
machine.
◦ The electricity rejection tape and ground braided line are located in the machine, so pass
the ground braided line to the inside of the hose and discharge tube.
Tighten Lock Lever
Ground braiding line (Do not hold this down with tape, etc.)
Electricity rejection tape
Loosed Lock Lever
Inspection before Starting
◦ The machine is made to be used as a powder spray machine/particle spray machine as delivered, and the only assembly required is
the attachment of accessories.
◦ Inspect all locations for loose screws. Check the chemical tank mount for looseness.
CAUTION
◦ Loose screws may cause an accident.
◦ Inspect the fuel hose and electric wiring for abnormalities. Also regularly maintain and replace the fuel hose and electric wiring.
◦ Adjust the length of the pack strap to fit your body.
◦ When the warning label is peeled off the main unit, buy a new one and attach it.