Maruyama BSA-500-1, Руководство по эксплуатации

Страница: 23 / 52

23
Knob bolt

Other
(1) How to Install/Remove the Rear Cover
[1] To remove the rear cover on the back, loosen the
two knob bolts, hold the handle and pull the cover
upward to remove.
[2] To install the rear cover on the back, guide its top
face through the hood and hook the bottom face,
and then securely tighten the knob bolts.
Caution

Never open the rear covers while the engine is
running. The rotating parts may be exposed and
cause injuries.

Do not touch the muffler while hot. Burns may
result.

Once the rear covers have been installed, be
sure to securely tighten the knob bolts. If the
bolts are loose, they may drop out during
transport and cause accidents.
(2) Tires
The wheelbase can be adjusted by reversing the tires
or adding a spacer or spacers (optional).
Caution

Do not use spacers other than those provided
as an option.
(3) Towing Hooks
[Front Side of Frame]
[Back Side of Frame]
If the machine gets stuck in a field and must be pulled
out, use these hooks to pull the machine forward and
backward. Keep the booms at the top positions.
Warning

Do not use the towing hooks to tow other
machine, etc. The machine may tip over.
Caution

Never pull the towing hooks sideways. The
hooks will come off easily and the machine will
tip over.
Caution

Never pass a rope, etc., over the boom unit and
pull the rope. The machine will be damaged.