Maruyama BL9000 Скачать руководство пользователя страница 15

Страница: 15 / 18

SPARK ARRESTER

GUARD

When air flow has dropped down during operation, stop the

engine and inspect the intake guard for blocking by debris.

Cleaning debris from intake guard.

Never use the blower without the GUARD of the blower.

Before each use, check that the GUARD is attached in

place and is free from any damage.

POTENTIAL HAZARD

• Muffler surface becomes hot when Backpack

blower is in operation and remains hot for some

time after the engine is shut off.

WHAT CAN HAPPEN

• Contact with hot muffler surfaces could cause a

burn.

HOW TO AVOID THE HAZARD

• Make sure the muffler is cool before inspecting

and cleaning the spark arrester.

Maintenance Interval

• The spark arrester should be inspected and cleaned after

every 25 hours of use.

• Replace the screen if it cannot be thoroughly cleaned, or

if it is damaged.

Spark Arrester Maintenance

1. With the engine at ambient (room) temperature, loosen

the knob and remove the air cleaner cover (see Cooling

Fin Cleaning).

2. Remove the screw from the muffler.

3. Take the spark arrester out of the muffler, and then

clean by brushing it.

4. Return the spark arrester to the muffler.

5. Tighten the screw securely.

EXHAUST MUFFLER

Maintenance Interval

The muffler should be inspected and cleaned after each

100 hours of use.

Muffler Maintenance

1. With the engine at ambient (room) temperature, loosen

the knob at air cleaner cover.

2. Remove the five screws retaining the top cover, then

remove the top cover. (See cooling fin cleaning.)

3. Remove the spark arrester (see spark arrester

maintenance). Clean the muffler with a stiff brush.

IMPORTANT: Be careful not to allow any dirt or debris

to fall into the exhaust port, as this can cause engine

damage.

5. Reinstall the spark arrester and tail onto the muffler,

then reinstall and tighten the four screws. (See spark

arrester maintenance)

6. Reinstall the top cover and the cleaner cover.

GENERAL CLEANING AND TIGHTENING

The MARUYAMA Backpack blower will provide maximum

performance for many hours, if it is maintained properly.

Good maintenance includes regular checking of all

fasteners for correct tightness, and cleaning the entire

machine. Contact an authorized MARUYAMA dealer for

additional maintenance suggestions.

SCREW

SPARK
ARRESTER

GUARD

POTENTIAL HAZARD

• When engine is running, fan is rotating and other

parts are moving.

WHAT CAN HAPPEN

• Contact with rotating fan or other moving parts

could cause serious personal injury or death.

HOW TO AVOID THE HAZARD

• Always turn off your Backpack blower before you

clean or perform any maintenance on it.

Содержание BL9000



















Результаты поиска

Содержание BL9000

Отзывы:

Бренды по названию

Популярные бренды

Maruyama BL9000, Руководство владельца/оператора

Результаты поиска

Содержание BL9000

Отзывы:

Бренды по названию

Популярные бренды