MARUTI SUZUKI 800, Руководство по обслуживанию

Страница: 565 / 644

7A1-16 MANUAL TRANSMISSION
6) Insert gear shift arm (1) in gear shift shaft (2), then fasten them
with bolt applied with thread lock cement.
Tightening Torque
(c): 34 N
.
m (3.4 kg-m, 24.5 lb-ft)
“A”: Thread lock 1322, 99000-32110
LEFT CASE
1) If input oil gutter has been removed, install it with bolt applied
with thread lock cement.
“A”: Thread lock 1322, 99000-32110
Tightening Torque
(a): 10 N
.
m (1.0 kg-m, 7.5 lb-ft)
2) Install differential side L oil seal (1) until it becomes flush with
case surface by using special tool with hammer, and then apply
grease to its lip.
NOTE:
Face oil seal spring side inward.
“B”: SUZUKI SUPER GREASE A, 99000-25010
Special Tool
(A): 09913-75510
3) Install countershaft L bearing cup into case bore by tapping it
with plastic hammer lightly.
INPUT SHAFT ASSEMBLY
Disassembly
1) Remove input shaft R bearing (1) by using bearing puller (2) and
press.