background image

12

(FAQ) FREQUENTLY ASKEd QUESTIONS 

How do I clean my speakers and subwoofer?

Just use a dust free cloth or a soft brush to remove the dust from your speakers. We recommend 

a  specialty  cloth  (available  at  the  Xtatic  shop  at  www.martinlogan.com)  that  cleans  your 

speakers better than anything else we have tried. 
 

What size amplifier should I use?

 

We recommend an amplifier with 50–100 watts per channel for most applications. Probably 

less would be adequate when used in home theater where a subwoofer is employed. The 

speakers will perform well with either a tube or transistor amplifier, and will reveal the sonic 

character of either type. 
 

Could  you  suggest  a  list  of  suitable  electronics  and  cables  ideal  for 

MartinLogan speakers? 

The area of electronics and cable choice is probably the most common type of question that 

we receive. It is also the most subjective. We have repeatedly found that brands that work well 

in one setup will drive someone else nuts in another. We use many brands with great success. 

Again,  we  have  no  favorites;  we  use  electronics  and  cables  quite  interchangeably.  We 

would suggest listening to a number of brands—and above all else—trust your ears. Dealers 

are always the best source for information when purchasing additional audio equipment.
 

Is  there  likely  to  be  any  interaction  between  my  speakers  and  the 

television in my A/V system?

 

No. The MLT-2 and MLT-2 center speakers are shielded and can be used with a CRT television.
 

Will exposure to sunlight affect the life or performance of my speakers?

 

We recommend that you not place any loudspeaker in direct sunlight. The ultraviolet (UV) 

rays from the sun can cause deterioration of grill cloth, speaker cones, etc. Small exposures 

to UV will not cause a problem. In general, the filtering of UV rays through glass will greatly 

reduce the negative effects.
 

Is it safe to set things on my subwoofer?

While your MLT-2 subwoofer is designed with a durable, stain-resistant surface, we advise 

you not to set anything on your MLT-2 subwoofer—especially containers holding liquids.

Is there likely to be any interaction between my subwoofer and the 

television in my Audio/ Video system?

 

Yes. The MLT-2 subwoofer doesn’t use a shielded driver. We recommend 3 feet between 

the MLT-2 subwoofer and video components that are susceptible to magnetic fields, such 

as CRT televisions.

Содержание MLT-2





















Отзывы: