INPUT
MUTE
BASS OUTPUT
Balanced
On
Electronic crossover
INPUT
MUTE
BASS OUTPUT
Balanced
On
Electronic crossover
When lit, indicates that balanced inputs are in use
by the EXOS crossover. This button should be
pressed to light the indicator LED if you are using
balanced XLR connectors. Otherwise, press the but-
ton to toggle the LED off if RCA connectors are used.
Warning.
All outputs are always on. Do not have
both the RCA and balanced XLR connectors hooked-
up simultaneously and attempt to use this button as
an A/B switch. You will have degraded performance
and possibly damage your equipment. Only one type
of connector should be used throughout your system.
This knob controls the overall
level of bass relative to the rest
of the music. Use it to adjust the
amount of bass according to
your taste or for matching the
output level of your bass ampli-
fier to that of your treble ampli-
fier. Rotate to the left for less
bass, to the right for more. Use
this to fine tune the bass after
properly setting the 25Hz and
5OHz contour controls.
Exos Crossover for the STATEMENT evolution 2 speaker system
Input
Mute
When lit, indicates that the outputs of the EXOS are
disconnected so that no signal reaches the
power amplifiers.
Push-Buttons
Battery Backup
The EXOS uses precision push-
buttons with LED indicators. A lit
LED indicates that the button’s
function or option is on. The MUTE
and BALANCED buttons toggle the
options on and off. The CONTOUR
buttons select the level of bass at
the frequency option.
An internal battery provides power
to store your crossover settings in
case of AC power interruption.
Page 3
Bass output
Содержание Exos
Страница 2: ......
