MartinLogan CLS IIz Скачать руководство пользователя страница 15

Страница: 15 / 24

Since the beginning of audio, achieving smooth dispersion

has been a problem for all loudspeaker designers. Large-

panel transducers present even more of a challenge because

the larger the panel, the more directional the dispersion

pattern becomes.

Full range electrostats have long been one of the most

problematic transducers because they attain their full range

capabilities via a large surface area. It looked as if they

were in direct conflict to smooth dispersion and almost

every attempt to correct this resulted in either poor disper-

sion or a serious compromise in sound quality.

After extensive research, MartinLogan engineers discovered

an elegantly simple solution to achieve a smooth pattern of

dispersion without degrading sound quality. By curving the

horizontal plane of the electrostatic transducer, a con-

trolled horizontal dispersion pattern could be achieved, yet

the purity of the almost massless electrostatic diaphragm

remained uncompromised. After creating this technology,

MartinLogan developed the production capability to bring

it out of the laboratory and into the market place.

You will find this proprietary MartinLogan technology used in

all of our products. It is one of the many reasons behind our

reputation for high-quality sound with practical usability.

This is also why you see the unique “see through” cylindri-

cal shape of all MartinLogan products.

The diaphragm material used in all MartinLogan speakers

employs an extremely sophisticated conductive surface

that has been vapor deposited on the polymer surface at

an atomic level. A proprietary compound is vaporized then

electrostatically driven into the surface of the polymer film

in a vacuum chamber. This process allows an optically

transparent surface adding no mass to the diaphragm that

is extremely uniform in its surface resistivity characteristics.

This uniform surface resistivity controls the electrostatic

charge on the diaphragm surface and regulates its migration.

As a result, no discharging or “arcing” can occur.

Transducer Integrity

All MartinLogan transducers begin with two pieces of

high-grade, cold rolled steel. These steel pieces are then

custom perforated and insulated with a unique composite

coating. This proprietary coating insulates the stator to

three times its actual needed working voltage and gives

the CLS IIz a wide margin of safe operation. In addition to

the electrical insulation properties, this coating also provides

the CLS IIz with a durable, attractive finish that dampens the

steel to prevent ringing. These pieces are then sandwiched

with our exclusive vapor deposited diaphragm and spacers

into a curved geometry and bonded together with aerospace

adhesives whose strength exceeds that of welding.

The result of these advanced technologies is a transducer that

is attractive, durable, highly rigid, well dampened and neutral.

Curvilinear Line Source (CLS

)

Vapor Deposited Film

MartinLogan Exclusives 15

ARTIN

OGAN

XCLUSIVES

Содержание CLS IIz

























Результаты поиска

Содержание CLS IIz

Отзывы:

Бренды по названию

Популярные бренды

MartinLogan CLS IIz, Руководство пользователя

Результаты поиска

Содержание CLS IIz

Отзывы:

Бренды по названию

Популярные бренды