MartinLogan bravado Скачать руководство пользователя страница 3

Страница: 3 / 60

plugged into voltages in which the product was not designed to operate.
If the product is equipped with a detachable power cord, use only the type
provided with your product or by your local distributor and/or retailer. If
you are unsure of the correct operational voltage, please contact your local
distributor and/or retailer.

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Approved under the verification provision of FCC Part 15 as a Class B Digital
Device.

Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the equipment.

RF EXPOSURE WARNING:

This equipment must be installed and

operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and install-
ers must be provide with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.

5GHz RF DEVICE STATEMENT:

This device operates in the 5.15–

5.25GHz frequency range and is restricted to indoor use only. Outdoor
operations in the 5150–5250MHz frequency range is prohibited.

CANADA, INDUSTRY CANADA (IC) NOTICES:

This Class B digi-

tal apparatus complies with Canadian ICES-003 and RSS-210. Operation
is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.

RADIO FREQUENCY (RF) EXPOSURE INFORMATION:

The radi-

ated output power of the Wireless product is below the Industry Canada
(IC) radio frequency exposure limits. The Wireless product should be used
in such a manner such that the potential for human contact during normal
operation is minimized. This device has also been evaluated and shown
compliant with the IC RF Exposure limits under mobile exposure conditions.
(antennas are greater than 20cm from a person’s body).

Caution: (i) The device operating in the band 5150–5250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems; (ii) The maximum antenna gain permitted for
devices in the bands 5250–5350 MHz and 5470–5725 MHz shall comply
with the e.i.r.p. limit; and (iii) The maximum antenna gain permitted for
devices in the band 5725–5825 MHz shall comply with the e.i.r.p. limits
specified for point-to-point and non point-to-point operation as appropri-
ate. (iv) Users should also be advised that high-power radars are allocated
as primary users (i.e. priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause interference and/or
damage to LE-LAN devices.