TEK500
MICROWAVE
LEAKAGE DETECTOR
I
NSTRUCTION
M
ANUAL
ALWAYS READ THESE INSTRUCTIONS BEFORE
PROCEEDING
Thank you for buying one of our products. For safety and a full understanding
of its benefits please read this manual before use. Technical support is
available from 01923 441717 and [email protected].
CONTENTS
1
Safety Information
1
1.1
Meaning of Symbols and Markings
1
1.2 Precautions
2
2 Introduction
3
2.1 Inspection
3
2.2 Description
3
2.3
Accessories
3
2.4 Battery
Installation
3
3 Operation
4
3.1 TEK500
Elements
4
3.2
Self Check
5
3.3 Microwave
Leakage
Test
5
3.4
Microwave Oven Output Power Test
7
3.5
Output Power Testing Considerations
8
4 Maintenance
10
4.1
Battery Replacement
10
4.2 Calibration
10
4.3 Cleaning
11
4.4
Repair & Service
11
4.5 Storage
Conditions
11
5 Warranty
12
Specifications
1. SAFETY INFORMATION
REMEMBER: SAFETY IS NO ACCIDENT
These instructions contain both information and cautions that
are necessary for the correct operation and maintenance of this
product. It is recommended that you read the instructions carefully
and ensure that the contents are fully understood.
Particular attention should be paid to the Precautions and
Technical Specifications.
Please keep these instructions for future reference. Updated
instructions and product information are available at:
www.martindale-electric.co.uk
1.1 Meaning of Symbols and Markings
Caution - refer to instructions
Equipment complies with relevant EU Directives
End of life disposal of this equipment should be in
accordance with relevant EU Directives.
1.2 Precautions
This product has been designed with your safety in mind, but
please pay attention to the following warnings and cautions before
use.
1
2
Cautions
The TEK500 must only be used by a skilled and competent person
who is familiar with the relevant regulations, the safety risks involved
and the consequent normal safe working practices, and under the
conditions and for the purposes for which it has been constructed
and specified.
Before use check the unit for cracks or any other damage. Make
sure the unit is free from dust, grease and moisture, especially the
conical spacer of the unit.
Do not
use if damaged.
NEVER
put the TEK500 or the thermometer supplied inside a
microwave oven.
It is important not to defeat or tamper with the safety interlock
switches on the microwave oven. Before carrying out the leakage
test, check that the safety interlock switches operate effectively, such
that the microwave power is cut OFF automatically when the oven
door is opened.
Avoid severe mechanical shock or vibration and extreme temperature.
To avoid possible corrosion from a leaking battery, remove the battery
if discharged, or when the unit is not in use for an extended period.
Microwaves are potentially dangerous. Microwave appliances should
never be adjusted or repaired by anyone except properly qualified
service personnel.
