Martindale Electric PC15250 Mk2 Скачать руководство пользователя страница 5

2

2. PRODUCT SPECIFIC SAFETY INFORMATION

Measurement Category IV (CAT IV) is applicable to test and 

measuring equipment connected at the source of the building’s low-

voltage MAINS installation.

The specified measurement category means the phase sequence 

indicator will be safe to the user if inadvertently connected to a voltage 

up to 600V AC/DC to earth within a CAT IV environment. It does 
not 
mean it can be used to test for a voltage beyond its maximum 

specified limits.
 
2.1 Precautions

This product has been designed with your safety in mind, but please 

pay attention to the following warnings and cautions before use.

 

 

Warning

The phase sequence indicator must only be used by a skilled and 

competent person who is familiar with the relevant regulations, 

the safety risks involved and the consequent normal safe working 

practices.

Before use check the unit for cracks or any other damage. The cables 

have black outer and contrasting inner insulation, to allow damage to 

the cables to be easily identified. If there is any doubt the unit should 
not be used.

 

Always verify the unit is functioning correctly on a known correctly 

sequenced 3-phase voltage source before and after use. Do not use 

the unit if the unit does not give the correct indications.

Always keep your fingers behind the test probe finger guards. Never 

touch the exposed metal probe tips.

Содержание PC15250 Mk2

















Отзывы: