8
T-Rex user manual
5 Working from a stable platform, clamp
or fasten the fixture to the structure.
6 Install a safety cable that can hold at
least 10 times the weight of the fixture
through/over the support and mounting
bracket as shown.
7 Loosen the swivel locks, tilt the fixture
to the desired angle, and retighten.
8 Verify that the fixture is at least 1.0 meters (39 in.) from the surface to be illuminated
and at least 0.3 meters (12 in.) from any combustible materials. Verify that the
clearance around the air vent and lamp access plate is at least 0.1 meters (4 in.).
U S I N G T H E B R A C K E T A S A F L O O R
S T A N D
1 The T-Rex may be placed on the floor by
standing it squarely on the mirror end or
with the support of the mounting bracket.
Never lay the fixture flat on its back!
2 (Optional) Install the mounting bracket as
described above.
3 Set the fixture flat on its mirror end or in
one of the positions shown below. Adjust
the mounting bracket and tighten both swivel locks.
4 Verify (1) that the fixture is stable, (2) that the fixture is at least 1 meters (39 in.)
from the surface to be illuminated and at least 0.3 meters (12 in.) from any
combustible materials, and (3) that the clearance around the air vent and lamp
access plate is at least 0.1 meters (4 in.).
www.audiovias.com
