Service manual
3 of 15
P3 PowerPort 1000 IP Install - Revision A, 10-26-2017
Figure 1: Safety instructions
Figure 2: Tools
Figure 3: ESD mat and wristband
General information
This service manual contains information about how to
service P3 PowerPort 1000 IP Install.
Safety instructions
Before you carry out service work, read this document.
Installation and service work must comply with local
regulations and accepted codes of good practice.
Observe the safety instructions in the user manual for
the product.
Tools
Make sure that the tools below are available before you
start working on the product:
•
ESD mat and wristband.
•
Allen key, H4.
•
PZ 2x100 screwdriver.
•
FZ 0 screwdriver.
•
8 mm socket spanner.
•
Plastic screwdriver.
•
Display panel, P/N 5070865.
Important! Take the necessary
precautions to prevent static
electricity from damaging the
product during modification or
repair.
