Installation
13
A C p o w e r
The Magnum 1500 is available in two models:
• US model (120 V, 60Hz for 105-115 VAC power supplies)
• EU model (230 V, 50Hz for 220-245 VAC power supplies)
The Magnum 1500 is supplied set up to match local voltage and
frequency settings. The factory default setting is shown on the serial
number label.
Warning!
For protection from fire and electric shock, the Magnum 1500
must be grounded (earthed). The power supply must have
overload and ground-fault (earth-fault) protection.
Check that power cables are undamaged and rated for the
current requirements of all connected devices before use.
Check the power supply setting before applying power.
Installing a plug on the power cable
The power cable must be fitted with a grounding-type cord cap (earthed-
type mains plug) that fits your power distribution system. Consult a
qualified electrician if you have any doubts about proper installation.
Following the cord cap manufacturer’s instructions, connect the yellow
and green wire to ground (earth), the brown wire to live, and the blue wire
to neutral. The table below shows some pin identification schemes:
Wire
Pin
Marking
Screw color
brown
live “L”
yellow
or
brass
blue
neutral
“N”
silver
yellow/green
ground green
Table 1: Cord cap wiring
