Martin MAC 401 Dual, Руководство пользователя

Страница: 14 / 40

14 MAC 401 Dual™ user manual
LED indicators
The two LEDs on the right of the display indicate fixture status:
• The DMX LED lights when the fixture is receiving a valid DMX signal.
• The SERVICE LED lights if the fixture requires a service intervention. At the same time, a message
appears in the display indicating the type of service required.
The SERVICE LED blinks when the fixture is in factory service mode.
Restoring factory default settings
The MAC 401 Dual™ factory default settings can be restored by scrolling to the main
FACT
menu,
pressing [Enter], opening the
FACT
submenu and applying a
LOAD
command.
Three sets of custom user settings can also be stored and recalled from the main
FACT
menu.
Control modes
The MAC 401 Dual™ can be set to various combinations of DMX control modes that are selected in the
DMX
-
PSET
menu. See “DMX protocol” on page 23 for details of the DMX commands available in the
different modes.
DMX control modes
The MAC 401 Dual™ can be set to four DMX control modes in the
DMX
-
PSET
submenu:
•
RGBX
– RGB color mixing with dynamic effects available (this is the default control mode setting)
•
HSX
– Hue, saturation, value color control with dynamic effects available
•
RGB
– RGB color mixing with no dynamic effects
•
HS
– Hue, saturation, value color control with no dynamic effects
Color temperature control is available in all four modes.
Pixel grouping
In all four DMX control modes, the LEDs in the MAC 401 Dual™ can be controlled collectively as one single
group or split into two or four segments that can be controlled collectively as though they were individual
pixels.
The following options are available in the
DMX
-
PGRP
submenu:
•
1
– LEDs are divided into four segments A to D, giving Individual control of four pixel groups
•
2V
– LEDs are divided vertically into two segments A and B, giving individual control of two pixel groups
•
2H
– LEDs are divided horizontally into two segments A and B, giving individual control of two pixel
groups
•
All
– All LEDs are controlled together as one pixel (this is the default pixel grouping setting).
The
DMX
-
PINV
submenu can be used to invert the pixel settings, from left to right and top to bottom.
1 2V 2H All
A
B C
D
A B
A
B
Figure 5: Pixel grouping (fixture on base, tilt positive)