Introduction
9
Packing panels in the flightcase
Important!
To ensure that LC 1140/2140 panels can withstand the shocks that normally occur during
transport, they must be packed in a Martin flightcase and transported in an upright position as
described in this section. Damage caused to panels that are incorrectly packed or exposed to
abnormal shocks is not covered by the product warranty.
When removing panels from the flightcase, keep all protective material for use when repacking.
When repacking panels in the flightcase:
1. Insert panels with the clear LED tubes facing the front of the flightcase as shown in Figure 2, and
2. Insert the protective strips supplied with the flightcase so that the channel in each strip faces the front of
the flightcase and slides over the clear plastic brackets as shown in Figure 3.
Important!
When transporting a flightcase that is not full, pack panels from the front without leaving gaps,
so that any empty slots are at the back of the flightcase. Transport and store flightcases
standing in an upright position only. Do not transport flightcases lying flat on their side.
Figure 2: Panel orientation in flightcase
Front
Front
Front
Figure 3: Protective strip orientation
Front
Содержание LC 1140
