Martin Exterior 1200 Wash, Руководство пользователя

Страница: 62 / 84

62 Exterior 1200 Wash user manual
3. Using MUM, click on the
F ix t u r e i n f o
button.
4. The
R e se t t a bl e L a m p- o n h ou r s
will be
displayed. Click on the
R e se t
buttons
beside
R e s e tt a b l e L a m p- o n ho u r s
and
R es e t t ab l e L a m p S t r i ke s
to return
these figures to zero.
8 . 5 . 3 I n s t a l l i n g t h e l a m p
Warning! Switch off the lamp, allow the luminaire to cool with
fans running for 20 minutes, then isolate it from AC power and
lock out power before servicing.
Wear safety glasses and gloves while installing or inspecting
the lamp.
To replace the lamp:
1. Cut lamp power, allow the luminaire to cool with fans running for 20 minutes, then
isolate it from AC power and lock out power.
2. See Figure 18. Loosen the
six Allen head screws
holding the front cover and
remove the cover and its
silicone seal. Avoid
damaging the seal during
removal. If you do not
remove the seal, you may
damage it and will make
access more difficult.
Figure 18: Removing the front cover and seal