Martin ELP CL, Руководство пользователя, Страница: 16 / 36

16 Martin ELP CL Profile user guide
To set the fixture’s DMX address:
1.
Enter the control menu and select DMX SETUP. Press ENTER.
2. Select DMX ADDRESS and press ENTER.
3. Use the UP and DOWN buttons to select the desired address setting.
4. Press ENTER to confirm your selection (or to return to the top level menu without changing the
settings, press the MENU button).
Setting DMX personality
DMX personality sets how many control channels are used. There are 3 personalities to choose
from:
•
1 channel – Dimmer only
•
10 channel – 8-bit dimmer with 8-bit control of functions (default)
•
17 channel – 16-bit dimmer with 16-bit control of functions
The function of each channel is described in the section “DMX protocol” on page 25.
To set the DMX personality:
1.
Enter the control menu and select DMX SETUP. Press ENTER.
2. Select DMX MODE and press ENTER.
3. Use the UP and DOWN buttons to select 1, 10 or 17.
4. Press ENTER to confirm your selection (or to return to the top level menu without changing the
settings, press the MENU button).
Other fixture settings
The PERSONALITY menu allows you to set other options for the fixture.
Stand-alone mode
The fixture can operate in stand-alone mode allowing control of multiple fixtures from a single
master fixture if no DMX console is connected. The options are OFF (default), MASTER and
SLAVE. Stand-alone operation will be automatically overridden by incoming DMX signal.
Light quality
The fixture can be set to either HIGH QUALITY mode (CRI 90, CCT of 6000K at 5600 lumens) or
HIGH OUTPUT mode (CRI 85, CCT of 5000K at 6900 lumens).
Dimming curves
Four dimming modes are available:
LINEAR The increase in light intensity appears to be linear as DMX value is
increased.
SQUARE LAW light intensity control is finer at low levels and coarser at high levels.
INV SQ LAW (Inverse square law) light intensity control is coarser at low levels and finer
at high levels.
S-CURVE light intensity control is finer at low levels and high levels and coarser at
medium levels.