Martin Alien 05, Руководство пользователя

Страница: 7 / 18

Installation 7
05 Driver units can receive instructions from:
• The dedicated Oracle control unit (orderable separately, P/N 90722000), which is
designed to provide simple operator functions, as well as access to more complex
programming facilities.
• Or from any DMX controller, DMX recorder, or any other USITT DMX512
compliant controlling device.
In the absence of a controlling device, simple stand-alone functions are available via
DIP switches on the 05 Driver unit.
F I X T U R E L O C A T I O N
The Alien 05 can be used as either a recessed ceiling fixture, or be positioned in a
wall as an up-light, down-light or sidelight.
The Alien 05 cannot be installed into a wall or ceiling panel that is more than 20
mm (0.8 in) thick.
Do not locate the Alien 05 in an unventilated space. Install the fixture in a location
where it is
• At least 0.5 meters (20 inches) away from the surface to be illuminated.
• Away from accidental public contact, as the surface of the sphere gets hot - up to
90 ° C (194° F).
• Installed with at least 50 mm (2 in) of clear space around the air vent at the rear of
the fixture (total space required including the depth of the fixture is 168 mm (6.6
in)).
• Not more than 10 metres away from the next fixture in the network.
P R E R E Q U I S I T E S
Before installing the Alien 05:
• Ensure that you have a 12 V AC halogen lamp transformer (not supplied) with which
to power the Alien 05, and that this can be connected to AC power and to the Alien 05
at the position where it is to operate from.
• Ensure that you have a CAT5 network cable (category 5 UTP patch cable, 4 pairs, 24
AWG) that is not longer than 10 metres (33 feet), and that can be run from the Alien
05 to the 05 Driver unit.
• If you are daisy-chaining another Alien 05 then you need an additional CAT5 network
cable, that is not longer than 10 metres (33 feet), to connect this luminaire to the next
one.