8
CAUTION
When objects are left under a heater in operation, they will be subject to radiant heat and might be damaged.
•
The principal application of this heater is to give the comfort of heat.
•
Provide fresh air ventilation at all times.
•
Respect minimum clearances to combustibles as shown in figure
11
above.
•
Install heater on a levelled, solid and stable ground.
•
Do not install in an explosive environment. Keep away from areas where gas, vapours or flammable liquids are
stored or used.
•
In case of high winds, shut-off completely the heater and the cylinder gas valve. Remove reflector dome.
•
Do not move the heater when hot.
CLEARANCES FROM COMBUSTIBLES
Respect clearances as shown :
- Extremities of reflector :
24 inches
- Above top of reflector :
18 inches
18 ‘’
24’’
CHOOSE A SAFE LOCATION FOR THE HEATER
GROUND ATTACHMENT
OR WHEEL KIT
The heater can be secured to the floor using
the bracket provided or can be moved by
installing the wheel kit supplied with the
heater.
figure 1
1
PREVENTIVE CARE AND MAINTENANCE
Once a year, the heater should be inspected for debris, insects, spider webs. Keep unit clean, wash finish with soft non-
abrasive detergent and cloth. Regular inspection of gas hose, proceed to leak testing between each cylinder refill.
Have heater inspected if...
•
You smell gas and/or you see yellow flames on burner.
•
Heater does not provide expected heat capacity
•
Burner makes little explosion sounds while operating. (This sound is normal when turning off the heater)
.
figure
10
