Martin Yale my OFFICE PRODUCTS P6500, Инструкция по эксплуатации

Страница: 9 / 12

7. To clean the rubber roller, spray MY Office Products Rubber Roller Cleaner and
Rejuvenator on a clean, lint-free cloth and rub the rollers to wipe them clean.
Rotate the rollers by turning the large pulley in either direction. Repeat this
process until the rubber and steel rollers are clean and completely dry.
8. Locate and remove both of the
roller drive belts found at either
ends of the steel rollers (Figure 7).
To clean the roller drive belts,
place both belts onto a clean cloth
and spray the belts with MY Office
Products Rubber Roller Cleaner
and Rejuvenator. Wipe the belts
dry and reinstall.
NOTE: Use of a cleaner other than
MY Office Products 200 Rubber
Roller Cleaner and Rejuvenator
could damage the rollers.
Figure 7
TROUBLESHOOTING
The folder does not function.
•
Check for a paper jam. If a jam exists, refer to the Unjamming Instructions
section.
•
Ensure that the wall power supply is plugged into the folder.
• Ensure that the wall power supply is plugged into an appropriate outlet.
•
The folder circuit breaker may have tripped. To reset, unplug the folder for at
least 1 minute. This will allow the circuit breaker to cool, which will
automatically reset the folder circuit breaker.