Unpack the unit and plug the power cord into a power outlet. The unit
should turn on when depressing the start button on the top cover and
shut off when releasing the start button.
NOTE:
If unit jams during operation, unplug the unit and clear all
jams. Then reinstall the power plug.
Step 1.
Prepare up to 10 standard envelopes to be opened by
tapping the top sealed fl ap side down fi rmly on desktop several times.
This will cause the envelope contents to slide to the opposite side of
that to be opened.
Step 2.
Place up to 10 prepared envelopes onto the feed tray with the
bottom edges of the envelopes back against the opener housing and
also against the top cover that contains the
START
button.
Step 3.
Momentarily depress the
START
button to begin the feeding
process. You may release the
START
button when envelopes begin
exiting the unit.
Step 4.
Depending on the condition of the envelope edges and
fl atness, the entire stack should automatically feed until the stack is
completed. However, under previously mentioned conditions of the
envelopes, you can depress the
START
button to begin feeding again
if it hesitated and did not complete the stack.
Step 5.
Your stack of envelopes will be stacked on the right side of
the unit and the scrap is easily separated from your opened
envelopes. The cut edges of your envelopes are cut such that they
are unlikely to cut or injure fi ngers.
