1501X OPERATIONAL INSTRUCTIONS
First step is to plug into wall outlet. The power adaptor connects on the inside
frame, under the feed table. Once plugged in, toggle the power switch and make
sure there is power to the motor*.
FEED TABLE EXTENSION
Extension
Table
Extension Table locking
pins.
The feed table extension is slotted on the bottom, and goes onto a dual set of
pins on the left and right side of the feed table. (See photo above.)
LOADING THE MACHINE- SINGLE SHEET APPLICATION
To load the feed table, position paper guides at proper width and insert stack.
Square the guides with the paper. Do not allow the guides to pinch the stock,
but, do not leave a great deal of room in between the side edges of stock and
the guides.
Stack of paper
should be squared
against the
retarder frame for
proper feeding.
1/16” clearance
between paper guides
and the sides of the
stack.
* Some units may not have a detachable power cord.
II
http://www.monomachines.com/
http://www.monomachines.com/
