Q
S
S
S
M
F
U
Y
L
T
L
R
A
A
A
I
Step 2
A)
Place table upside down on the top (Part A ). Make sure predrilled holes line up
according to the diagram.
B)
See Fig 1
- Attach tilt mechanisms (Part L ) into predrilled holes on table top (Part A
) using 4 ea. 5x14mm Screws (Part S ) for each mechanism.
C)
See Fig 2
- Attach tilt mechanism to the right and left arms using 5mm spacers (Part
Y ), large washers (Part T ), small washers (Part U ) 1 ea. 6x50mm bolts (Part Q ) and
nuts (Part R ).
D) See Fig 3
- Slide the metal tray (Part I ) to the edge of table top (Part A ) and attach
using 6 ea. 5x14mm Screws (Part S ).
E) See Fig 4
- Attach crossbar (Part F ) using tilt brackets (Part M ) and 4 ea. 5x14mm
screws (Part S ). Make sure to line up holes on brackets to predrilled holes on the table
top (Part A )
Fig 1
Fig 2
Fig 3
Fig 4
