Martin System BEAGLE MASTER 4 x 4, Руководство пользователя

Страница: 56 / 68

54
● For example, for programming the orders for dog 1:
> Briefly press the “P” button to scroll through the pictograms (18, 19, 20 and 21)
and select button 1 (pictogram 18).
> Hold down the programming button “P” (9). The various operating modes are
scrolled through (see page 6, “Choice of Operating Mode”). Release the button
when the desired operating mode appears.
> Then choose the stimulation level (from 0 to 18) using the rotating button (6)
(see page 6, “Choice of Stimulation Level”).
> Repeat the operation for the other buttons.
Please note: level 0 = sound operating mode only.
To switch on the remote control, briefly press any button. A programme is displayed on
the LCD screen (7) (stimulation intensity level and operating mode). The remote control
switches off automatically after about half an hour. When the remote control is switched
off or in standby mode, press any button to switch it back on again.
1.2 Switching the collar on and off
To switch the collar on or off, place the lower left-hand corner of the remote control
(8), marked by a sign, onto the configuration point of the receiver (24):
• The rising tone and the green colour LED (23) indicate that the collar is
switched on.
• The descending tone and the red colour LED (23) indicate that the collar is
switched off.
An LED (23) placed on the front of the receiver flashes green to indicate that the collar
is in operational mode.
1.3 Connecting the receiver collar
To configure the receiver to work with its remote control, you must carry out the
following procedure:
Place and hold the lower left-hand corner of the remote control (8) on the receiver
configuration point (24) until its LED (23) flashes orange.
Then remove the remote control to a distance around 1 metre from the receiver and
then press on the chosen “Send” button on the remote control. The LED then flashes
green to confirm the operation has been carried out correctly.