Martin Audio MLA Mini, Руководство пользователя

Страница: 28 / 48

MLA Mini User Guide V1.0
28
MLA MINI
USER GUIDE
Step 5: Lift the next cabinet on top of the previous one and secure both the front corners with
further Flying Pins. At the rear, remove the Flying Pin used to stow the rear mounting plate so
that it drops down and engages with the slot in the lower cabinet’s bracket. Secure this with the
Flying Pin.Raise the upper cabinet to set the angle between the cabinets by fitting a Flying Pin
in the hole marked “6.5” on the rear bracket. This gives the correct inter-cabinet angle required
by Preset 1.
Step 6: Repeat Step 5 twice to add the two remaining MLA Mini cabinets, while referring to the
Preset diagrams starting on page 18 and the table below. Note that the inter-cabinet angles
for cabinets 2 to 3 and 3 to 4 differ. Take care to set the correct angles.
Step 7:
The connections to the 4 x Mini array (see page 22) are most conveniently made at
this stage.
Step 8: Depress the safety catch to unlock the height adjustment, and turn the handle to raise
the telescopic pole mount so that the front lower edge of the bottom Mini is approximately
1.57 m above the level that the MSX is standing on. Lock it in place by tightening the knob on
the opposite side of the pole from the handle.