12
TECHNICAL SPECIFICATIONS
EMX1A
INPUTS (SIGNAL)
2 Electronically Balanced
IMPEDANCE
36K ohms (18K ohms per leg single ended)
CMRR
60dB 20Hz - 10KHz
CONNECTORS
3 Pin female XLR
INPUTS (SENSE)
4 Electronically Balanced
IMPEDANCE
36K ohms
CONNECTORS
Shrouded 4mm sockets
OUTPUTS
4 Electronically Balanced
SOURCE IMPEDANCE
47 ohms
MIN LOAD IMPEDANCE
500 ohms
MAX OUTPUT
+20dBu into 500 ohms limiter defeated
CONNECTORS
3 Pin Male XLR
FREQUENCY RESPONSE
-3dB @ 25Hz 12dB/octave
-3dB @ 35KHz 12dB/octave
DISNOISE
0.01%THD @ 2V output (limiters cancelled)
NOISE/
>97dB @ 2V output 20Hz - 20KHz quasi peak
NOISE RATIO
o/c input
LIMITERS
Individual for each channel. With program
related attack times Ratio 20:1
INDICATORS
4 x Limit LED’s. Sub/Full Range LED’s
MAINS SUPPLY
IEC mains connector with integral fuse holder
MAINS VOLTAGE
Externally selectable on IEC inlet
100-120-220-240V AC, 50/60Hz.
Voltage tolerance on each setting ± 10%
MAINS FUSE
220-240V: -250mA Type ‘T’ (L)
100-120V: -500mA Type ‘T’ (L)
DIMENSIONS (W) 482mm x (H) 44mm x (D) 211mm
(W) 19ins x (H) 1.75ins x (D) 8.3ins
WEIGHT
3.5kg (7.7lbs)
SHIPPING DIMENSIONS
(W) 530mm x (H) 120mm x (D) 310mm
(W) 21ins x (H) 4.7ins x (D) 12.2ins
SHIPPING WEIGHT
4.1kg (9lbs)
Due to our policy of continuous improvement all specifications are subject to change
without notice.
Martin Audio – EMX1A System Controller
E
NGLISH
9
CONTENTS
<
>
GUIDES