Martin Audio CCD10 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 64

background image

CDD

User Guide V1.0

62

CDD

USER GUIDE

WARRANTY

Martin Audio CDD and CSX Series Loudspeakers are warranted against manufacturing defects in
materials or craftsmanship over a period of 5 years from the date of original purchase.

During the warranty period Martin Audio will, at its discretion, either repair or replace products
which prove to be defective provided that the product is returned in its original packaging,
shipping prepaid, to an authorised Martin Audio service agent or distributor.

Martin Audio Ltd. cannot be held responsible for defects caused by unauthorised modifications,
improper use, negligence, exposure to inclement weather conditions, act of God or accident, or
any use of this product that is not in accordance with the instructions provided by Martin Audio.
Martin Audio is not liable for consequential damages.

This warranty is exclusive and no other warranty is expressed or implied. This warranty does not
affect your statutory rights.

During the warranty period Martin Audio will, at its discretion, either repair or replace products
which prove to be defective provided that the product is returned in its original packaging,
shipping prepaid, to an authorised Martin Audio service agent or distributor.

Martin Audio Ltd. cannot be held responsible for defects caused by unauthorised modifications,
improper use, negligence, exposure to inclement weather conditions, act of God or accident, or
any use of this product that is not in accordance with the instructions provided by Martin Audio.
Martin Audio is not liable for consequential damages.

This warranty is exclusive and no other warranty is expressed or implied. This warranty does not
affect your statutory rights.

COPYRIGHT AND TRADEMARKS

Copyright Martin Audio Ltd. Martin Audio, CDD Series and CSX Series are trademarks of Martin
Audio Ltd and are registered in the United Kingdom, United States and other countries.

All other trademarks and trade names are the property of their respective owners.

2015 © Martin Audio Limited. All rights reserved.

«
...
60
61
62
63
64
»

Содержание CCD10

































































Отзывы:

Нет отзывов

Похожие инструкции для CCD10

Бренд: Hama Страницы: 28

Бренд: Hama Страницы: 28

Бренд: JAMO Страницы: 21

Бренд: R.V.R. Elettronica Страницы: 38

Бренд: Yamaha Страницы: 24

ABICAR 1200 PRO

Бренд: Abicor Binzel Страницы: 64

Бренд: Bandit Страницы: 3

Бренд: BAMO IER Страницы: 40

Бренд: Karma Страницы: 8

Бренд: Magmaweld Страницы: 172

Бренд: Paton Страницы: 31

Бренд: Valcom Страницы: 1

Бренд: WaterLogic Страницы: 69

Бренд: Abus Страницы: 2

Бренд: Jasic Страницы: 18

Бренд: Yamaha Страницы: 8

Бренд: ZKTeco Страницы: 16

Бренд: Omnitronic Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды