background image

Step 8 

Push the grille into position ensuring that the grille is properly located 
in the baffle slots. 

 

 

Locate grille tags into slots 

 
 

Your Martin Audio ceiling loudspeaker is now ready for use. 
 

Warranty 

 

Martin Audio ceiling loudspeaker products are warranted against 
manufacturing defects in materials or craftsmanship over a period of 
5 years from the date of original purchase.  

 

During the warranty period Martin Audio will, at its discretion, either 
repair or replace products which prove to be defective provided that 
the product is returned in its original packaging, shipping prepaid, to 
an authorised Martin Audio service agent or distributor. 

 

Martin Audio Ltd. cannot be held responsible for defects caused by 
unauthorised modifications, improper use, negligence, exposure to 
inclement weather conditions, act of God or accident, or any use of 
this product that is not in accordance with the instructions provided 
by Martin Audio. Martin Audio is not liable for consequential 
damages.  

 

This warranty is exclusive and no other warranty is expressed or 
implied. This warranty does not affect your statutory rights. 

All material © 2007. Martin Audio Ltd. Subject to change without notice.

Содержание C4.8T











Отзывы: