Marti RPT-30, Руководство пользователя

Страница: 11 / 43

FIXED BASE STATION, TSL, & RE-
PEATER INSTALLATION
1. Install transmitter in standard rack by using Rack
Mounting Kit No. 700-253 available from Marti. CAU-
TION: Allow one panel space above and below transmit-
ter for inlet air-flow to internal fan.
2. Connect transmitting antenna to ANTENNA connec-
tor on RPT-30 rear panel.
3. If a receiver is to share the antenna with the transmit-
ter (as in a two-way base station), the transmitter must be
equipped with optional Antenna Relay No. 570-038
available from Marti. After relay is installed, connect
RECEIVER jack on RPT-30 rear panel to receiver an-
tenna connector using 20-inch Coaxial Cable No. 585-
026. Receiver muting during transmitting is accomplished
using Mute Cable No. 585-038-2. This cable plugs into
the ACCESSORY connectors on each unit.
4. Plug transmitter into a 3-prong, grounded 115 volt,
AC outlet. WARNING: Failure to use a properly
grounded outlet could result in a safety hazard or faulty
equipment performance.
5. For fixed automatic repeater operation, connect Cable
No. 585-037-1 (FIG. 4.) between accessory connectors of
the receiver and RPT-30 transmitter. Connect receiving
antenna to receiver J6 and transmit antenna to RPT-30
ANTENNA connector.