background image

5

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all 

instructions on the machine before attempting to assemble and operate.

READ THE OPERATOR'S 

MANUAL(S) – Read, understand 

and follow all instructions in the 

user manual(s) before attempting 

to assemble and operate.

SAFETY ALERT – Indicates  

a precaution, a warning, or  

a danger.

Wear personal protective 

equipment, including  

close-fitting clothing.

The rotating part will continuously 

run for several seconds after you 

turn off the machine.

Double Insulation.

WARNING! Do not expose the unit 

to rain or wet conditions.

CAUTION! Avoid contacting the 

guide bar tip with any object. Tip 

contact may cause the guide bar 

to move suddenly upward and 

backwards, which may cause 

serious injury to the user.

WEAR EYE AND HEARING 

PROTECTION – For protection 

against injury, wear ear defenders 

and safety goggles.

WARNING! SHOCK HAZARD – 

Keep at least 50 ft (15 m) away  

from power lines. Do not overreach. 

Keep proper footing and balance  

at all times.

Keep bystanders and children  

a safe distance away.

SWITCH OFF! Remove plug from 

outlet immediately if the cord is 

damaged or cut.

Symbols

Symbols

Descriptions

Descriptions

DANGER! ROTATING  

BLADES – Keep hands and  

feet away from openings while the 

saw is running.

SWITCH OFF! Remove plug from 

outlet before cleaning or conducting 

maintenance checks.

Wear protective gloves and non-

slip footwear when using the 

machine and handling debris.

50 ft

(15 m)

Содержание MTS-PS10





















Отзывы: