Discharge Chute Assembly
1. Loosen the knob to lift the chute deflector (Fig.
4).
2. Secure the chute deflector by locking the deflector knob
(Fig. 5).
NOTE:
Do not overtighten the knob.
Chute Crank Assembly
1.
Slide the upper chute crank through the rubber ring
located on the middle frame (Fig. 6).
2.
Remove the thumbscrew on the crank rod connector by
hand (Fig. 7).
3.
Slide the upper chute crank into the crank rod connector
(Fig. 8).
Fig. 3
Middle frame
Upper
frame
Knob +
T-bolt
Fig. 4
Chute deflector
Deflector knob
Fig. 5
Fig. 6
Rubber ring
Upper chute crank
Fig. 7
Thumbscrew
Lower chute
crank
Crank rod
connector
Fig. 8
Upper chute
crank
Crank rod
connector
8
