Step 3. Loosely attach small metal legs (P6) to "X" metal stretcher (P7) as
shown below image 3.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 2. Attach big metal frames (P2 & P3) to bottom of table top (P1) as shown below image 2. Securely tighten
all bolts with Allen wrench ( H5), turn the assembled table to an upright position .
Image 4
Step 4.
a. Attach the assembled legs (P6) to the bottom of
small table top (P5) as shown below image 4.
b. Securely tighten all bolts with Allen wrench ( H5),
turn the assembled table to an upright position .
c. Assembly is complete.
Failure to follow these
instructions may cause the bolts to misalign
during assembly.
Image 3
Image 2