2. Calibrator Interface
Figure 1 shows the location of the process measurement inputs, while table 1 describes
their use.
Figure 1
Pressure Measurement Inputs
Table 1 Process Measurement Inputs
No. Name
Description
1, 2
Input Terminals
These terminal are used to measure current and a contact
closure for switch test.
3
P1 Pressure Port
This is the connection for the internal sensor P1
4
P2 Pressure Port
This is the connection for the internal sensor P2
5
RTD Probe Connector
This connector is where the RTD probe is plugged in.
4
Side View
www.
GlobalTestSupply
.com
Find Quality Products Online at:
