Martel 306 Dataloger, Инструкция по эксплуатации, Страница: 9 / 11

MARTEL 306
7
V. Setup ThermoLog (Thermo DataLogger)
ȋ
RS232 interface software:
The ThermoLog package contains:
1. Two 3.5” diskettes
2. Custom designed RS232 cable for THERMOLOG.
System Required:
Windows 95, Windows 98, Windows NT 4.0, or above.
Minimum Hardware Required:
- 486-100 MHz PC-compatible, 16 MB RAM
- At least 5 MB of hard disk space available to install THERMOLOG program
- Display resolution of 800X600 recommended
Install ThermoLog:
1. We strongly recommend closing all other applications before installing ThermoLog software.
2. Insert setup diskette 1 into floppy disk drive.
3. Choose the Start button on the Taskbar and select Run.
4. Type A:\SETUP and choose OK. The ThermoLogg.exe ( executable file ) and help
files will be copied to your hard disk (default location is c:\program files\ThermoLog ).
For other operating instructions, please refer to the on-line help available under ThermoLog.
Main Menu
Link Test :
Open the Link Test window to search for a thermometer connected to the PC. When you start
the THERMOLINK program, this window displays first and will automatically search for a
thermometer. The result will be shown in the a box.
Control Panel:
Open the Control Panel Window to control the thermometer via the buttons in this window.
Click to exit ThermoLog.
HELP - Click to show on-line help.
TABULAR - Click to show the
present data in list form.
DATA LOGGER - Click to load the
recorded data from thermometer.
STATUS - Indicates if
thermometer is connected or not.
GRAPH - Click to plot
data in graph form.
Click to show graph ,
panel, and tabular
windows.
CONTROL PANEL –
Provides real-time,
on-screen control of
the thermometer.
LINK TEST - Click to test
communications between the
thermometer and PC.