2
NOTE
: The carrier will not honor any claims
unless all shipping material is saved for their
examination. After examining and removing
contents, save packing material and carton in
the event reshipment is necessary.
Set-up
Before beginning, become familiar with the
keypad layout and the configuration of the
input/output jacks. Remember, these jacks are
used in multiple configurations so pay careful
attention to the jack identification label on back
of unit and how the test leads are connected for
the specific application.
Operating Procedure
1. Turn on power and select the desired range
by depressing the range select key. Your
range choices are CPM, Hz, and KHz.
2. Make connections as required. Refer to the
operating mode section or the rear jack
identification label for connection information.
3. The step and scroll keys adjust the output
value up or down. Holding the scroll key
continuously for several seconds will
increase the scroll rate. The step 'key' allows
the user to make larger changes quickly and
is preset to step in 10% of range increments.
www.
.com
1.800.561.8187
