E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
WARNING
Installation MUST carry out by a qualified and licensed electrician.
Install the LED light kits as illustrated above.
How to Install Light Plate
Fg.7
How to Install
Place fan into hanger bracket and align ball joint slot with
hanger bracket as illustrated.
Fg.5
Fg.6
After wiring is
completed, attach the
canopy to the hanger
bracket by pushing
upwards and twisting
anti-clockwise. Tighten
screws and ensure
canopy is not touching
the ball joint.
How to Install Blades
Fg.3
Fan only model
Fan LED Light Model
Attach the blade to the
top of the motor using
the 2 screws provided.
Tighten the screws and
repeat this procedure for
all blades.
Fg.4
Attach the blade to the
top of the motor using
the 2 screws provided.
Tighten the screws and
repeat this procedure for
all blades.
NB: Ensure the blades do not get damaged or bent during the installation process while the fan is on the ground. This will
affect the performance and balance of the fan and this is NOT covered under warranty.
Fan LED Light Model
