MT-4609
6
This kettle is intended for heating water only. Use of any other liquids or food may damage the interior and void warranty.
Do not allow the cord to hang over the edge of the table or counter, or contact any hot surfaces.
This kettle is designed for Household use only! Do not use outdoors.
When not in use and before cleaning, disconnect the kettle from the outlet. Allow the kettle to cool completely before attempting to clean.
Do not remove the lid during the heating cycle. Scalding may occur. Do not operate the kettle without water. If the unit overheats, please allow the unit to cool for at least 15 minutes.
Do not fill above the MAX line; this may cause water to overflow, which may cause scalding.
Steam may damage walls or cabinets, during use turn the spout away from walls toward an open space; use heat resistive pads under the kettle to prevent damage to wood finishes.
Do not place or use the unit on or near a hot gas or electric burner or in a heated oven.
Never operate the appliance when the lid is open or removed.
To remove from the power source, turn the unit OFF and pull the plug from outlet. Never pull by the cord.
To reduce the risk of fire or electrical shock, do not remove the bottom cover.
Do not use for kettle for other than intended use.
To prevent discoloration, do not place tea bags, coffee, instant noodle, or any other liquids or items inside the kettle.
Do not wash under direct running water as this will damage the control panel. Clean with a soft moist cloth.
Do no use or store the unit in direct sunlight or near other heat sources (oven, stove, etc.).
The kettle may have difficulty bringing water to boil when used in high altitudes or extreme cold conditions.
Do not disassemble or attempt to repair on your own.
PLEASE SAVE THiS INSTRUCTION!
BEFORE INITIAL USE
Remove all packaging materials.
Fill kettle to the MAX line and bring to a boil. When the unit completes the boiling cycle, discard the water - repeat the process 2 to 3 times. This will remove any dust or residue remaining from the
manufacturing process.
BOILING WATER
1. Remove the unit from base.
2. Open the cover by depressing the button near the handle.
3. Fill the kettle with your desired amount of water. Do not fill above the MAX line.
4. Close the lid by pressing down gently until it locks (clicks) into place.
5. Place the kettle on base, ensuring that it is correctly engaged.
6. Connect cord to power outlet and switch unit ON; the power indicator lights up.
7. The kettle will switch off automatically when water has come to a boil.
After use, unplug and empty unused water. Ensure kettle is switched off before removing from base. Heating can be stopped at any time by the operating the switch.
As a safety feature, the unit may not start immediately after shutting off. Please allow 15 to 20 seconds for kettle to cool down before switching on again.
If kettle ever boils dry, please wait 15 minutes for unit to cool before refilling with cold water. The safety cut-off will automatically reset during this time.
Do not open lid when in operation. Steam escaping from the spout is hot. This appliance is only suitable for heating water; do not use any other liquids.
A minimum of 0.75L of water must be used to prevent overheating.
Содержание MT-4609
Страница 1: ...ELECTRIC KETTLE USER MANUAL MT 4609 RUS 3 GBR User manual 5 UKR 7 KAZ 8 BLR 10...
Страница 3: ...MT 4609 3 RUS MAX MIN MAX MIN MAX...
Страница 4: ...MT 4609 4 3 85 C 60 C 70 C 80 C 90 C 80...
Страница 10: ...MT 4609 10 BLR MAX MIN MAX...