TWILIGHT SWITCH
type TS-31-2-G
.4
User manual
I. Purpose
The TWILIGHT SWITCH TS-31-2-G.4 is designed to automatically turn on the receiver at a certain (set) light
intensity and turn it off when the light intensity is twice as high, or vice versa (NO and NC contacts). It is used
for receivers switched on and off at high illuminance (100 ..... 100,000lx). Mounting on a vertical surface,
outdoors, in the sunlight. Protection degree IP65.
II. Features of TWILIGHT SWITCH TS-31-2-G. 4
>> high switching power 16A (4000 W) 250VAC, 16A (384 W) 24VDC
>> high inrush current (resistance to 100 A surge current)
>> freedom of connections:
> executive relay contacts (one normally open contact - NO, one normally closed contact - NC) galvanically
separated, which allows connections in various configurations
>> precise logarithmic regulation:
> 100 ... 1,000 lx - standard, advertising on / off, etc.
> 1,000 ... 10,000 lx - range of switching on / off blinds, roller shutters, etc.
> 10,000 ... 100,000 lx - range of switching on / off of photovoltaic installations (solar), etc.
>> traffic light (LED) with operating status (fig. 2):
> LED-1 - indication of 230V supply voltage on terminals 1,2
> LED-2 - relay switching signalling - terminals 3,4,5 (short circuit 3,4, opening 4,5)
> LED-3 - internal signalling (without delay) of exceeding the set lighting threshold
> LED-4 - external relay switching indication (short circuit 3,4, opening 4,5)
>>. convenient installation:
> two stainless screws, with expansion bolts, for wall mounting (included)
> cover fixed with four stainless screws
> two PG-13.5 glands for cable entry.
A specialized relay is used in the TS-31-2-G.4 TWILIGHT SWITCH
G2RL-1-E-HR by OMRON, designed to switch various lighting lamps. The special design enables effective
switching of lamps with an inrush current of up to 100 A per pulse.
Fig.3.: Template for drilling holes for installing
the TS-31-2-G.4 TWILIGHT SWITCH
V. Repair and maintenance
All repairs of the TWILIGHT SWITCH TS-31-2-G.4 are performed by the manufacturer. The device does not
require any maintenance. When the sensor becomes contaminated, clean it with a clean, damp cloth. The
device does not require any additional maintenance.
VI. Warranty Card
The manufacturer guarantees the correct operation of the TS-31-2-G.4 TWILIGHT SWITCH. The warranty
period is 36 months from the date of sale. The warranty is extended by the time of repair. Warranty repairs are
performed by the manufacturer free of charge after the AUTOMAT is delivered to the manufacturer. Improper
use of the device or independent modifications to it will void the warranty.
8
4
m
m
Made in Europe
www.mart-electronics.eu
In order to protect the environment, do not throw away used electrical appliances
and electronics together with municipal waste. Used equipment should be delivered to
collection points for recycling free of charge. Any information on this can be obtained
at sellers, distributors, manufacturer or on the Internet. The product's packaging is made of
ecological materials. The PVC packaging tape will be used while stocks last.
The TS-31-2-G.4 TWILIGHT SWITCH meets the requirements of the European Union
Directives
- Directive LVD 2014/35/EU - Low Voltage Directive of 26 February 2014
- Directive EMC 2014/30/EU - Eletromagnetic Compatibility Directive of 26 February 2014
3
-
YEAR
WARRANTY
