MT8495 User’s Manual V1.0
___________________________________________________________________________________
75
8.2 Save & Abort
If there is an error reading data barcode during configuration, you may cancel
1/all data by scanning below configuration barcodes.
For example, barcode data ‘1’, ‘2’ ,’3’ have been scanned respectively during
configuration. If you want to cancel ‘3’, scan
Abort 1 Data
. If you want to
cancel ‘123’, scan
Abort All Data
. Alternatively you may scan
Abort
Configuration
to cancel the whole configuration process.
Save Configuration
Abort 1 Data
Abort All Data
Abort Configuration