MT8495 User’s Manual V1.0
___________________________________________________________________________________
38
Send All*
Send Start Only
Send End Only
Send Center Only
6.5.2 Data Length
Set Start Length
Set End Length
Start/End Length can be 0 to 255 digits, converted into two-digit hex value (00
~ FF) during configuration. Please refer to Appendix C – ASCII Table for
corresponding hex value.
Example: to set Start Length as 2
1. Convert 2 to Hex equivalent as 02
2. Scan
Set Start Length
3. Scan
0
,
2
respectively from
8.1 Data 0~F
4. Scan
Save Configuration
from
8.2 Save & Abort
6.6 Encoding Format
Below are output encoding format options. Please note that GBK is used for
Notepad, UNICODE for Microsoft Word, and raw for serial data output.
GBK*
UTF8
