Marson MT8230B, Руководство пользователя

Страница: 23 / 63

MT8230B User’s Manual V1.5
23
Terminator = Tab Terminator = None
Terminator = CR + LF
GS Replacement
GS Replacement enables the scanner to replace GS <0x1D> in barcode data by a specific
character.
Set GS Replacement Clear GS Replacement
To set GS Replacement, please follow below steps:
1. Scan
Set GS Replacement
2. Scan a configuration barcode representing the replacement character from Chapter 5
Configuration Barcode – Displayable Character or Control Character
3. Scan one of the Character Set 0 ~ 4 in Chapter 5 Configuration Barcode – Control
Character if the replacement character chosen in step 2 is from Control Character . If the
replacement character is from Displayable Character , please skip this step.
To cancel GS Replacement, simply scan Clear GS Replacement .