CHARGING THE BATTERY
1. Flip open the micro USB port on the scanner.
2. Insert the micro USB connector into the port on the
scanner and USB A connector into a USB port on
the host PC or smartphone/tablet adapter.
-
5
-
-
6
-
BEEPER INDICATION
LED INDICATION
Single long beep Power up
Single beep
Good read
Single short beep The scanner reads a Code39 of
ASCII in configuration procedure
Two beeps
i. Wireless connection
ii. The scanner successfully reads
a configuration barcode
Two short beeps
Good read (Batch mode/Memory mode)
Four beeps
(Hi-Lo-Hi-Lo)
Out of range/Poor connection
Five beeps
Low power
Three beeps
Wireless disconnection
Three short beeps i. The scanner reads a barcodes
while disconnected.
ii. The scanner reads an unexpected
barcode during configuration
procedure. (scan [ABORT] to abort
and start over)
Several short beeps The scanner switches from one
communication mode to another
Off
Flashing Blue
Green for 2 sec
Flashing Red
Solid Red
Standby or Power off
Disconnected or Discoverable
Good Read
Low power
Charging
Scanner
Micro USB
USB A
Host
GETTING STARTED
To scan a barcode, make sure the aiming spot is pointed
directly at the barcode scanned.
