4 of 18
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
WS2173
SAFETY PRECAUTIONS CONTINUED
Never reach into the drum or place tools into the drum while the mixer is running
8. Do not overfill the drum. Do not exceed the mixer’s rated capacity.
9. Do not smoke while refueling the engine. Shut off the engine and allow it to cool before refueling. Do not spill
fuel.
10. Block/chock mixer wheels when mixing.
11. Use safety chains while towing mixer.
12. Keep the mixer in good operating condition. Loose or damaged parts are dangerous.
13. Avoid loose clothing that could get caught in moving parts or on control levers.
Keep hands and feet away from moving parts
14. Do not add material to the drum while stopped. Start the drum before adding material.
15. Keep all warning, caution and safety instruction labels in good condition. Replace missing, damaged or
illegible labels.
TOWING & SAFETY CHAINS
For transporting the mixer, slide the tow pole out as far as possible and insert the locking pin. Make sure drum
is locked in position and engine housing is closed and secured; cross the safety chains under the tow pole and
fasten them to the tow vehicle. (fig.1) When operating the mixer, slide the tow pole in and lock it in place.
NOTE!
Safety chain length may need to be altered for proper connection to tow vehicle. Reposition the hooks,
DO NOT cut chain.
Allow enough slack to permit proper vehicle turning while keeping chains
snug enough to prevent tow pole from contacting the ground in case the
hitch uncouples.
WS1066
SAFETY DECALS (if applicable)
If your safety and operating decals are damaged, they can be replaced by contacting Customer Service
FIGURE 1
