Marshalltown Company Gilson MIX59000D Скачать руководство пользователя страница 2

INTRODUCTION 

The Gilson Wheelbarrow mixer is great for the do-it-yourself home project. It allows you to work almost anywhere. The 
mixer will clear a 30” door and easily fits into an elevator. A quiet 115-volt motor allows you to work indoors without 
emissions. 

The exclusive in-mold helix drum gives a better homogenous mix. The lifting action picks material up from the base of 
the drum. 

Used in the mixing of concrete, plaster, adhesives, overlays, chemicals, seed, and grain – the 
options are endless. 

•  Mixes 3 ½ Cu. Ft. of cement, mortar mix, or 2 bags of pre-mix concrete. 
•  High torque ½ HP single phase 115 volt electric motor and “On/Off” Switch 
•  Strong polyurethane drum will not crack or rust 
•  Ring gear is enclosed for safe operation 
•  Lightweight – 125 lbs. – Can ship UPS 
•  Handles adjust for easy storage 
•  Clears a 30 inch door opening 
•  Fast mixing and easy clean up 
•  Simple drive system 
•  Quiet Operation 
•  Easy Assembly

IMPORTANT—READ THIS MANUAL BEFORE ASSEMBLING OR OPERATING

After referring to the operation manual, if you still require assistance, please contact our customer service department

This operator’s manual has been prepared to provide the information you need to correctly operate and maintain your 
unit. Read it carefully and keep it for future reference.

The replacement of any part on this product by other than the manufacturer’s authorized replacement part may 
adversely affect the performance, durability or safety of this product. Should you ever require repair parts or service, 
contact your authorized parts and service dealer.

The manufacturer reserves the right to make changes or add improvements to its product at any time without prior 
notice. The manufacturer also reserves the right to decide, upon its discretion at any time, to discontinue a product.

Read and follow all safety precautions and operating instructions in this manual.

Содержание Gilson MIX59000D

















Отзывы: