2.
Data Sheet
User Manual VS-SW-100– V0
.2
Page 8 of 11
2/2016
Rackmount Ears Included
3.1 Data Sheet: Features
The
VS-SW-100
is a 26-port 10/100/1000Mbps Power over Ethernet switch
which consists of 24 PSE/PoE ports with an additional 2 SFP uplink port.
The VS-SW-100 has been designed specifically for use with IP Cameras, Encoders and Decoders.
It is compliant with PoE IEEE 802.3af/802.3at. Each 24 PSE/PoE ports can concurrently supply up
to 30 Watts of Power per Port (PoE+). This avoids the use of Multiple Power Supplies and makes
System Installation a snap. Supporting 24 PTZ IP Cameras from One Power Outlet makes this an
Efficient and Environmentally Friendly Solution.
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3x Flow
control, IEEE-802.3af/at
• Supports power of up to 30 watt for each PSE/PoE port
• Provides 24 10/100/1000Mbps switching ports and 2* Gigabit SFP ports
• All ports support Auto-MDIX function
• Dedicated 2000Mbps full-duplex bandwidth to the each port
• Broadcast storm control supporting store & forward operation
• Non-blocking & non-head-of-line blocking full-wire speed forwarding
• Auto-learning networking configurations
• Built-in 8K MAC learning table, 1.25M bits buffer memory
• Supports packet length up to 1536Bytes
• Filtering/Forwarding Rate: 1000Mbps/1,488,000pps; 100Mbps/148,800pps; 10Mbps/14,880pps
• Status LEDs: System Power, Link/Activity, and PoE/PSE on line
• Transmission Media: 10Base-T Cat.3, 4, 5 UTP/STP; 100Base-TX Cat.5, 5e UTP/STP; 1000BASE-T Cat.5e,
6 UTP/STP
VS-SW-100 Advanced PoE Management and Measurement
By pressing the “Select” Button you can scroll through the PoE Power Consumption of each Port as
well as see the PoE Budget (P) and the PoE Available Power (L).