4.
Remote Configuration
User Manual VS-547-3GSDI – V1.0
Page 39 of 74
3/2016
4.5 Event Configuration
Local Event Configuration
When a Decoder is connected to an IP Camera, one system becomes a Local System
and the other a Remote System (generally a system which is being used by the user is
called as Local System). Event Actions can be configured from the Remote System as
well as the Local System. For Example: it is possible to turn on an alarm device in the
Local (center) Decoder System when a sensor device in Remote (site) IP Camera is
triggered. The Local section configures the actions for the events from the Local (self)
System and the configuration activates the local devices and the Remote sections
configure the actions for events from Remote (peer) System.
The following table lists the possible actions for the events:
Action
Description
Alarm out
Triggers Alarm (Relay) Port
Sends Email to the specified Email Address;
AVI File can be attached
FTP
Upload AVI File to a specified FTP Server
Google Drive
Upload Google Drive storing through network
Preset
Move to the Preset Position
Local & Remote Event Configuration
-
Sensor1 / Sensor2
Configure the actions when the sensor is activated. Multiple actions can be set for a
single event.
-
On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be set for a
single event.
